Sipe Tyres

Tyre fitting · Logo, cards, stationery, social and workwear
Sipe Tyres

Sipe is a tyre fitting identity with the trade in the middle of the name. The I is drawn as a tyre seen face-on, rounded at both ends and cut through by a directional tread of chevrons pointing forward.

The name is the tread

A sipe is the thin slit cut into a tyre's tread blocks to help it grip on a wet road, so the name is already trade language. The logo leans into that. Set in capitals, the S, P and E stay plain and heavy, and the one letter that changes is the I, which becomes the tyre. You read the word first and notice the tread a moment later, and once you have seen it you cannot miss it.

The chevrons point up and forward, the way a directional tyre is fitted, which gives a static word a sense of movement without speed lines or swooshes.

Sipe Tyres logo on dark slate with wheel nuts, a valve and a tread gauge
The reversed lockup on slate, with wheel nuts, a valve and a tread gauge.

How the mark is built

The tread I stands at the full cap height of the wordmark and is twice as tall as it is wide, a little over half the width of the S. Its top and bottom are rounded with a radius of about a third of its width, enough to read as rubber rather than a steel bar, while the sides stay straight.

The tread itself is four solid pieces separated by three chevron cuts. Every cut rises to a point on the centre line at the same angle, and the pieces repeat at an even pitch from top to bottom, so the pattern reads as one continuous tread rather than three separate arrows. The cuts are true gaps in the shape, not thin lines drawn on top, which is why the I holds up at small sizes.

The S, P and E are left as Archivo Black draws them and spaced evenly around the I, so the tyre never looks dropped in. In the stacked lockup TYRES sits underneath in capitals about a fifth of the cap height, ranged left under the S. The icon is the tread I alone, a tall, narrow shape that still reads as a tyre in a profile picture.

Heavy type for a heavy trade

The wordmark is Archivo Black in capitals, tightly spaced so SIPE reads as one block from across a forecourt. Tyre businesses are mostly seen at a distance, on a sign above a bay or a board by the road, so the logo is built for size and contrast first and detail second.

Yellow and rubber

Two colours carry the brand: a strong warning yellow and the near-black of new rubber, with chalk white for paper. Yellow is the colour of a workshop under its lights and the colour drivers already link with roadside help. It is kept for the tread I, so the yellow always lands on the idea, while the letters go white on black and black on chalk.

Every layout is supplied in full colour, reversed for black grounds, and in one colour for vinyl and embroidery, where the whole word runs in black on yellow.

Sipe Tyres brand guidelines sheet with palette, typeface and logo layouts
The guideline sheet: four colours with their values, the typeface, the stacked and one-colour layouts and the tread icon.
Sipe Tyres logo on a black t-shirt, the tread I in yellowSipe Tyres logo on rubber black

Workwear and the bay

Tyre fitting is dirty work, so the tee is black, with the reversed logo across the chest and the tread I in yellow. Above a workshop bay the logo works reversed on a black fascia, and the tread icon alone can mark each bay, so customers see the brand where they wait.

Sipe Tyres business cards, front and back, on slate
Business cards: a tread band on black, a tread-depth gauge on yellow.

Cards that check your tyres

The card front is the reversed logo on black, with a yellow band down the right-hand edge printed with the same chevron tread. The back flips to yellow, with the name, the number set large and four services beneath it. Down the right side runs a tread-depth scale from 0 to 8 mm with the 1.6 mm legal minimum marked, which makes the card worth keeping in a glovebox.

Sipe Tyres letterhead with a yellow tread edge, a black DL envelope and business cards on slate
A tyre check letter with a tread edge, a black envelope and the cards.

A letter that records the check

The most useful paper a tyre fitter hands over is the record of what was found. The letterhead is set up for exactly that: a tyre check with a short note on the legal minimum and four ruled lines, front left to rear right, for the readings to be written in. A yellow strip printed with the chevron tread runs down the left-hand edge, so the page stands out in a pile of receipts, and the DL envelope is rubber black with the reversed logo and a yellow tread band across its right-hand end.

Three Sipe Tyres social posts: a fitter in the workshop, a yellow 1.6 mm tread depth post and a black puncture repair post
Social posts: the workshop, the legal minimum and a repair.

Posts that teach something

Tyres are a grudge purchase, so the posts give drivers a reason to look. One is a workshop photograph with the reversed logo and a promise to fit and balance while you wait. One is pure yellow, with 1.6 MM set huge beside the same tread-depth scale as the card. The third, on black under a band of dark tread, says repair before replace, with one plain line on when a puncture can be plugged. All three use Archivo Black in capitals, so they read as Sipe before anyone sees the name.

Sipe Tyres colourways
Colourways: reversed, full colour, one colour and on yellow.

How it carries across

The same few rules run through every piece: black or chalk grounds, yellow only for the tread, and the chevron used as a pattern on its own for edges and bands. That gives a workshop sign, a letter and an invoice a family look without printing the full logo on everything. Price boards and invoices use Archivo Black for headings with a plain sans for small print, so the type stays the same from the sign above the bay to the receipt.

Sipe Tyres logo on graphite streaks
The logo on graphite streaks with amber highlights.

Questions about this project

What is a sipe?

A sipe is one of the thin slits cut across a tyre's tread blocks. They give the rubber extra edges to grip with on a wet or icy road. The name is trade language, which is why the mark is drawn from the tread.

Why change only the I?

Changing one letter keeps SIPE readable from across a forecourt. The eye reads the word first, then finds the tyre, and because the yellow sits only on the I the idea is never lost among the other letters.

Why black workwear rather than yellow?

Black hides the grime of the job, and it is the ground the yellow tread looks brightest on, so the accent always lands on the idea rather than on a stained shirt.

Want something like this for your business?

Logo, colours, typography and guidelines, with business cards to match from £59, so every piece looks like the same business.

Everything we make

Each part of this project is also a service on its own, at a fixed price.