Jarrah Joinery

Joinery · Logo design
Jarrah Joinery

Jarrah is a joinery identity with the joint inside the name. The dot of the j is cut as a dovetail tail, the flared piece that locks two boards together at the corner of a drawer, and it is picked out in the colour of oak against letters the deep red of jarrah heartwood.

A joint you can read

Joiners and carpenters usually reach for a saw, a chisel or a plane, and those tools belong to the whole trade. A dovetail belongs to fine joinery in particular: it takes time and care to cut, and people who know wood look at the corners of a drawer before anything else. Putting a tail in place of the dot turns the first letter into a small sign of craft, without adding an icon beside the name.

The tail keeps its real shape, flaring outwards at a shallow angle, so anyone who has cut one recognises it and everyone else sees a neat, deliberate detail.

Jarrah Joinery logo in its own colours over a timber workshop
The logo in its own colours over a timber workshop.

How the mark is built

The j is drawn as two parts. The stem is a single heavy stroke that drops below the baseline and turns into a short hook. Above it sits the tail, a trapezoid that widens towards the top, exactly as a tail widens towards the end grain of a board. The tail is a little wider than the stem beneath it and carries its extra width to the right, so it reads as a separate piece of timber set on top rather than a squared-off dot.

Between the tail and the stem runs a thin gap, much narrower than the strokes around it, like a fine saw cut. It is the detail that makes the idea work. A tail touching the stem would merge into one shape and read as a nail head; separated by a sliver of air, it reads as a piece that could be lifted out and fitted into something else.

The top of the tail rises just above the ascender of the h, so the first and last letters frame the word. JOINERY sits beneath in small spaced capitals, starting exactly under the left edge of the j. Lifted out of the word, the j and its tail become the icon: a tall, narrow shape, more than twice as high as it is wide, which suits a branding iron, a small brass plate or a stamp on the back of a finished piece.

A heavy lowercase

The wordmark is Mona Sans Wide Black in lowercase. Lowercase is what makes the idea possible, since only the small j has a dot to replace, and the broad, heavy letterforms give the word the weight of solid timber. The letters are set close so the word holds together as one plank of type, and the round shapes of the a, r and h keep it from feeling stiff.

Colours from the timber rack

Jarrah is a Western Australian hardwood with a deep red-brown heart, and the palette starts there. Jarrah red is the main colour, Heartwood brown the dark ground, Oak the accent kept for the dovetail, and Shaving, the pale colour of a fresh wood curl, is used for paper.

Colour is what makes the dovetail visible at a glance, the way a joint made in two woods shows one timber against the other. On dark grounds the letters turn white and the tail moves to a lighter oak, so the joint stays the brightest thing in the logo. In one colour the tail joins the letter, and because it keeps its flared outline and the gap beneath it, it still reads as a dovetail rather than a dot.

Jarrah stacked logo on a dark brown t-shirt with the oak dovetailJarrah Joinery logo on jarrah red

On the workshop tee

The stacked lockup sits small on the chest of a heartwood brown tee, the j above the name and the tail in oak. Brown hides sawdust better than black and belongs to the palette, so the workwear looks like part of the brand rather than a uniform bought separately. The same version suits a square social profile.

Jarrah Joinery colourways
Colourways: reversed, full colour, one colour and on oak.
Jarrah Joinery guideline sheet with jarrah, oak, heartwood and shaving swatches, the typeface and the logo layouts
The guideline sheet: four timber colours, the typeface and every layout.

Made to be marked onto things

The guideline sheet shows the reversed primary on Heartwood, the stacked lockup on Shaving, the wordmark on white and the j icon on jarrah red, beside the four colours and their values. A joiner's logo is often burnt, engraved or stamped rather than printed, so every layout is supplied in one colour as well as full colour and reversed, and the dovetail is drawn with enough weight to survive a branding iron. The logo design includes the primary lockup, the stacked version, the wordmark and the j icon.

Jarrah Joinery letterhead, heartwood DL envelope and business cards on slate
Dovetails along the edges of the letterhead, the envelope and the card.

Paper with joints along the edge

We set the logo on a letterhead, a DL envelope and a business card to see how the dovetail behaves as a pattern. Repeated along an edge, the tail becomes a row of through dovetails, jarrah tails between oak pins, across the head of the letterhead and the foot of the envelope, as if the paper had been jointed to the next board. The card front is jarrah red with the stacked logo; the back turns to Shaving, with the number and a short list of work marked by small oak tails in place of bullets. None of it needed new artwork; every edge is the logo's own tail, repeated.

Three Jarrah Joinery social posts: the logo over the workshop, an oak dovetail post and a shaving timber movement post
Social posts that explain the wood.

Posts about the wood

The social posts teach a little about timber. One post sets the stacked logo over the workshop photograph. One is oak, with a row of large dovetails along its foot and a line on why a dovetailed drawer holds. The third is Shaving, with the j icon at the top and a plain note on how solid timber moves with the seasons. Every post uses the same heavy lowercase, so the feed reads as one workshop's voice.

Jarrah Joinery logo on red-brown streaks
The logo on red-brown streaks, the dovetail kept in oak.

Questions about this project

Why a dovetail and not a saw or a chisel?

Tools belong to every trade that cuts wood. A dovetail is the joint people look for when they judge fine joinery, so it says what kind of work this is, not just what it is made with.

Why is there a gap between the tail and the j?

Without it the tail and the stem merge into one shape and read as a nail head. The thin gap makes the tail a separate piece, which is exactly what a dovetail is.

Which layout suits a small stamp or branding iron?

The j icon on its own. It is tall and narrow, so in a small space it can be used larger than the full name, and the gap under the tail has a better chance of staying open when the mark is burnt or pressed into timber.

Want something like this for your business?

Unlimited concepts, every layout and file format, first concepts within 48 hours.

Everything we make

Each part of this project is also a service on its own, at a fixed price.