Ingrain Flooring

Flooring · Logo design
Ingrain Flooring

Ingrain is a flooring mark drawn from herringbone. Three pairs of angled blocks stack into the icon, and the straight joint that runs up the middle of them forms the letter I. The A in the wordmark is the same split pair, so the floor pattern appears twice in the logo.

The pattern is the letter

Flooring logos often show a plank, a roller or a house with a floor drawn in. Herringbone is more specific. It is the pattern people ask for by name when they want a floor to look considered, and it is a fitter's skill, because the first row has to be dead straight or the whole room drifts. The icon stacks three herringbone pairs, and the gap between the left and right blocks becomes a vertical line: an I made from the joint rather than from the blocks.

Ingrain Flooring logo on dark slate with oak herringbone blocks and fitting tools
The reversed logo on slate, with oak blocks and fitting tools.

How the mark is built

Each pair in the icon is two short blocks leaning in towards a centre line, the way blocks are laid either side of a chalk line on a real floor. The joint between them is left open from top to bottom, and that open line is the I. Nothing is added to make the letter; it is the space the fitter leaves between the two sides of the pattern.

In the primary lockup the icon stands half as tall again as the capitals. Its top lines up with the top of INGRAIN and its foot with the foot of FLOORING, so the icon spans the whole name block and the lockup sits as one neat rectangle, like a block cut to fit.

The A in the wordmark is the same leaning pair with no crossbar. Because its apex is a point, it is drawn a touch taller than its neighbours, the small correction type designers make so a pointed letter does not look short beside flat-topped ones. The wide setting gives the A room, so the split never crowds the R and the I either side of it.

Wide capitals, laid level

INGRAIN is set in Mona Sans Wide Black capitals, spaced evenly so the word sits like a row of boards with tight joints. Capitals give a level top and bottom line, which suits a trade that is all about flat, true surfaces. FLOORING sits beneath in small spaced capitals, lined up with the start of the word.

Two versions, on purpose

The logo has a light-ground and a dark-ground version that differ in more than reversal. On linen or white everything is forest green, because oak on a pale ground lacks the contrast to read at small sizes. On forest green, charcoal or a photograph, the icon turns oak and the letters white. Both belong to one system, and the guidelines say which goes where, so a printer never has to guess.

Forest and oak

Deep forest green is the main colour, a step away from the greys and browns flooring firms often use, and oak is the accent, the colour of the material itself. Deep Forest is the darker ground for envelopes and card fronts, and Linen sits behind long reading. Wherever the herringbone appears in oak, it looks like wood rather than a graphic.

Ingrain stacked logo on a forest green t-shirt with the oak iconIngrain Flooring logo on forest green

On the fitter's tee

The stacked lockup on a deep forest tee puts the oak herringbone above the name, small on the chest. A fitter spends much of the day kneeling, so the logo sits high, where it is seen when they stand up to talk to a customer. The reversed version is the one used here, so the icon keeps its oak.

Ingrain Flooring colourways
Colourways: reversed with oak, full colour, one colour and on oak.
Ingrain Flooring guideline sheet with forest, oak, deep forest and linen swatches, the typeface and the logo layouts
The guideline sheet: the oak icon on dark grounds, the wordmark on white.

The sheet sets the rule

The guideline sheet makes the two-version rule visible. The reversed primary sits on Forest, the stacked lockup on Deep Forest and the icon alone on Forest, each with the herringbone in oak, while the wordmark appears on white in forest green. The four colours carry their values and the type panel notes the split A. The logo design supplies the primary lockup, the stacked version, the wordmark and the icon, each in full colour, reversed and one colour.

Ingrain Flooring letterhead, deep forest DL envelope and business cards on slate
A forest band on the letterhead, herringbone on the envelope and both sides of the card.

A floor along the foot of the page

We set the logo on a letterhead, a DL envelope and a business card to see how the pattern repeats. The letterhead opens with a forest band carrying the reversed logo, so the oak herringbone appears at the top of every page, and a strip of herringbone runs along the foot like the border of a parquet floor. The envelope is Deep Forest with a panel of herringbone up its right-hand end, a few blocks picked out in oak. The card front lays the stacked logo on a forest panel over a herringbone field; the back is Linen, with the wordmark, the number and an oak and forest border. Every pattern is the icon's own block, repeated, so these layouts show what the logo files can already do.

Three Ingrain Flooring social posts: the logo over oak blocks, a herringbone or chevron post and a subfloor post
Social posts: a photograph, a pattern explained and a fitter's point.

Posts that explain the pattern

On social the pattern becomes something to explain. One post sets the reversed logo over a photograph of oak blocks and fitting tools. The forest post answers a question people ask before choosing a floor, herringbone or chevron, with the two patterns drawn side by side in oak. The Linen post makes the point fitters care about most, that a flat floor starts with the subfloor, and closes on a strip of herringbone.

Ingrain Flooring logo on forest streaks
The logo on forest streaks, the icon kept in oak.

Questions about this project

Why is the logo all forest green on light grounds?

Oak on linen or white is too pale to read at small sizes, so on light grounds the whole mark runs in forest. The oak herringbone is kept for forest and dark grounds, where it reads as wood.

How does the I work if nothing draws it?

The two sides of each herringbone pair stop short of each other, leaving a straight open joint up the middle. The eye reads that line as an I, so the letter comes from the space a fitter leaves, not from an extra shape.

Can the herringbone be used as a pattern on its own?

Yes. The pairs repeat without redrawing, so they can border a quote, fill the back of a card or edge a website header, always from the same artwork.

Want something like this for your business?

Unlimited concepts, every layout and file format, first concepts within 48 hours.

Everything we make

Each part of this project is also a service on its own, at a fixed price.