Garvell Build

General building · Logo, stationery, social posts, website and workwear
Garvell Build

Garvell is a general builder's identity made from the way a builder actually puts a structure together. The G in the mark is two solid slabs, a navy corner and a cobalt hook, set side by side with one even joint between them, the way two precast units sit on site before the gap is pointed up.

Two slabs and a joint

Building logos usually reach for a roof line, a house outline or a brick pattern. Those pictures describe the finished building, and they put a builder in the same drawer as every roofer, estate agent and kitchen showroom in the area. Garvell starts from the work instead: heavy pieces placed square, level and tight to one another.

The navy piece is a corner, the top and the left side of the G. The cobalt piece is the hook, the bottom, the right side and the short return that turns the shape into a letter. Neither piece reads as a G alone. Put them together with an even gap and the letter appears, which is the point: the business is in the joining, not in either part.

Garvell Build logo on dark slate with a trowel, spirit level, tape and string line
The reversed lockup on slate: white lettering, the hook in bright cobalt.

How the mark is built

The icon is drawn on a square. Each slab is a fifth of the square's width thick, the same weight on every side, so the mark has no thin parts to fill in when it is printed small or stitched. The joint between the two pieces is about a quarter of a slab's thickness and it runs at the same width along both edges where the pieces meet. That even joint is the detail that makes the mark look built rather than drawn.

The hook's return reaches in to just short of the centre line of the square. Any further and the letter starts to close into an O with a notch; any shorter and it reads as a C. Stopped there, the G reads first at a glance and the open counter still looks like a space another slab could slide into.

In the wordmark the same slab G leads the name, and ARVELL follows in Mona Sans Wide Black, sized so the cap height matches the slab G exactly. BUILD sits under the G in small spaced capitals, aligned to its left edge, so the descriptor hangs from the corner piece like a label on a pallet. The stacked layout puts the icon above the wordmark for a chest print or a square profile picture, and the icon alone is the favicon, the sticker for a site board and the corner of every document.

Garvell Build guidelines: palette with hex values, Mona Sans Wide Black specimen and four logo layouts
The guidelines spread: palette, type and the four layouts.

Wide, heavy type

Mona Sans Wide Black is broad and dense, so a short name holds its shape across a hoarding banner or the top of a quotation. Its letters are flat-sided and square-shouldered, which suits a mark made of slabs: the G and the type look cut from the same material.

Navy, cobalt and a paper ground

Site Navy carries most of the weight, on cards, the website's side rail and workwear. Cobalt is a brighter, cleaner blue than most building firms use, chosen so the hook stands out against the navy and so the one button on each page is unmistakable. Trace, a pale blue, is kept for small text on navy, and Paper, a cool off-white, sits behind long reading.

On navy the hook switches to a lighter cobalt so it keeps its contrast. On white it returns to full cobalt. The mark is never set in white alone where the hook would disappear; the one-colour versions are kept for embroidery and vinyl.

Garvell Build stacked logo printed on a navy t-shirtGarvell Build logo in full colour on Site Navy

Workwear

On the navy tee the stacked layout sits high and centred on the chest in white and light cobalt. Because the icon is two solid shapes with one straight gap, it embroiders cleanly on a polo or a hat, with no fine lines for the thread to lose.

Garvell Build business cards, front and back, on slate
Cards: two slabs and a joint on the front, the number and the work on the back.

Cards built from the joint

The card front repeats the idea at full size. The navy card has a cobalt block set into its bottom right corner, set apart by a pale joint of even width, and the phone number sits on the cobalt block. The back is Paper, with the name, a heavy navy rule, the three kinds of work in a short list and the number again in the wide face, with the slab icon in the corner.

Garvell Build letterhead, DL envelope and business card on slate
Letterhead, DL envelope and card.

Letterhead and envelope

The letterhead is laid out like a quotation, because most of what a builder posts is one. The logo and number sit at the top, and a navy band runs along the foot with a cobalt slab rising from its right end, set apart by the same joint. The DL envelope uses the same corner, with a navy strip down its right-hand edge and a cobalt slab let into it.

Three Garvell Build social posts on a pale field
Social posts: a line, a finished job and the stages of a build.

Social posts

The posts take three jobs. One sets the line Built square, finished level in the wide face on navy. One frames a finished extension above a navy panel with a short caption. One sets out how a build runs as three slabs that lengthen from groundworks to finish.

Garvell Build website on a laptop and a phone
The homepage on desktop and mobile.

A website laid out in panels

The homepage is built the way the logo is: solid panels set on a pale ground with one even gap between every one of them. A navy rail holds the logo, the menu and the phone number down the left side, so the number is always on screen. The first panel makes the promise, one team and a fixed quotation before any ground is broken, beside a photograph of a finished extension with a cobalt slab let into its corner.

Below, the four kinds of work sit in panels of different sizes, a cobalt panel promises one fixed price beside the list of what every quotation covers, and the five stages of a build rise from left to right like courses of blockwork, with the last one in navy for handover.

Garvell Build colourways
Colourways: reversed on navy, full colour, one colour on cobalt and one colour black.

Questions about this project

Why cobalt for a builder?

Most building firms use navy, red or yellow. Cobalt is bright enough to stand apart from those, it holds its colour on a hoarding or a site board, and it gives the hook of the G a clear contrast against navy, so the two slabs stay two slabs.

Why is there a gap in the G?

The gap is the joint between two placed pieces, the detail that says the letter has been built. It is drawn the same width all the way along, so it reads as a deliberate joint rather than a break.

Does the slab G work stitched?

Yes. Every part of the icon is a fifth of its width thick and the gap is straight, so it embroiders on a polo or a hat in one or two thread colours without fine lines filling in.

Want something like this for your business?

The logo, brand identity, business cards, letterhead, a 5-page website, a social kit and Google Business Profile, designed together in one pass.

Everything we make

Each part of this project is also a service on its own, at a fixed price.